• WIN6 - ��� ���y���� WinOS/2 �� 2.1 ��� WARP?

    From FAQServer@2:5020/181 to All on Sun Apr 27 07:37:13 2025
    [Q]: ��� ���y���� WinOS/2 �� 2.1 ��� WARP?

    [A]: Ronald Van Iwaarden (rvaniwaa@carbon.denver.colorado.edu)

    I just installed a copy of the Gold OS/2 WARP 3.0 and wanted to run my WinOS/2 from 2.1 under WARP. I now have both fullscreen and seemless support for WinOS/2. This is how I did it:

    1) Copy the os2\mdos\winos2 tree to another drive, say g:.
    To do this, here are the steps:
    a) mkdir g:\os2
    b) mkdir g:\os2\mdos
    c) g:
    d) cd \os2\mdos
    e) xcopy /s c:\os2\mdos\winos2 .
    2) Install WARP on the original drive.
    3) Insert disk 9, go to your root drive and type the following:
    unpack a:\winbase
    4) add the following lines to your config.sys:
    device=c:\os2\mdos\vwin.sys
    device=c:\os2\mdos\vw32s.sys
    5) In config.sys put g:\os2\mdos\winos2 in your path and dpath
    6) In autoexec.bat, put g:\os2\mdos\winos2 in the path.

    Note that this is not supported by IBM and may result in all data on your hard drive being lost. I will take no responsibility for any damage that occurs due to your implementation of the above.

    However, if you want version 3.0 but need to run Windows progs, this is a way to get away without giving any more $ to MS and you get OS/2 fullpack now rather than in 1995!

    [A]: Alexander Belyaev (2:5035/13.15)

    ��p����:

    � ⮫쪮 �� y�⠭���� ᥡ� OS/2 Warp 3.0 � ���⥫ ���y���� WinOS/2 �� �p���y饩 ��pᨨ. ����p� y ���� ���� �����p��� �������p����� WinOS/2 �
    WinOS/2 � ����.

    ��� ��� � �� ᤥ��� :

    1) �����p���� ��p��� os2\mdos\winos2 �� �py��� ��� ( ���p���p, g: )
    ��� �⮣� �y��� �믮����� ᫥�y�騥 ������� :
    a) mkdir g:\os2
    b) mkdir g:\os2\mdos
    c) g:
    d) cd \os2\mdos
    e) xcopy /s c:\os2\mdos\winos2 .

    2) ��⠭���� WARP 3.0 �� �y��� ���.
    3) ��⠢�� ��� 9 � ��᪮���, ��襫 � ��p����� ��⠫��
    p������ � ���� � ���p�� ������y
    unpack a:\winbase

    4) ������� ᫥�y�騥 ��p�窨 � config.sys:
    device=c:\os2\mdos\vwin.sys
    device=c:\os2\mdos\vw32s.sys
    5) � config.sys �����⨫ g:\os2\mdos\winos2 � ��p��� path � dpath
    6) � autoexec.bat �����⨫ g:\os2\mdos\winos2 � ��p��y path.

    �p��y�p�����, �� �� ����⢨� �� �����p�������� IBM, � p��y���� ��
    ��� ����� ���y� ���� ���p��.
    H� �᫨ ��� ����� ���y��� OS/2 3.0 � �����p���� WinOS, �� �� ����� �⤠���� �� �� ᢮� �p���� �����p� �p�� Micro$oft, � �� ��室.

    --- INN 2.7.3 (rc1 version)
    * Origin: This echo is READ-ONLY. Send %HELP to FAQSERVER at (2:5020/181)