GEN123 - USB setup HOW-TO
From
FAQServer@2:5020/181 to
All on Thu Nov 14 07:37:05 2024
[Q]: USB setup HOW-TO
[A]: Peter Knapper (3:772/1.10)
Here are my Config.Sys entries for USB -
BASEDEV=USBUHCD.SYS
BASEDEV=USBD.SYS /REQ:USBUHCD$
DEVICE=E:\OS2\BOOT\USBPRT.SYS
BASEDEV=USBHID.SYS
Line 1 is the driver for the USB chipset on my (ASUS) motherboard,
Line 2 is for generic USB support under OS/2,
Line 3 is for generic USB Printer support,
Line 4 is for the USB management S/W.
NOTE: I used the same PRINTER driver for my EPSON STYLUS 700 for either port type.
The real catch is setting up the correct PRINTER port to be used, and also indicating what actual printer equates to LPT1, LPT2, LPT3 and PRN, etc... Once I figured it all out its easy to swap things around, but as I said above it looks like I am stuck with parallell printing at the moment.
--- INN 2.7.3 (20241006 prerelease)
* Origin: This echo is READ-ONLY. Send %HELP to FAQSERVER at (2:5020/181)