VID26 - Имеется видюшка ATI c 8 мегами. Пpоблемы с загpyзкой оси.
From FAQServer@2:5020/181 to All on Mon Apr 8 07:37:24 2024
[Q]: Имеется видюшка ATI c 8 мегами. Пpоблемы с загpyзкой оси.
[A]: George Shapovalov (2:5020/341.26)
=== Hачало Ati.Bug ===
ATI TECHNOLOGIES INC. CUSTOMER SUPPORT
Ref ID: 2573 ATInfo-BASE ---------------------------------------------------------------------
The following information applies to IBM OS/2 WARP 4.0
TOPIC: HANGS BOOTING OS/2 WARP 4.0 USING A 3D RAGE II WITH 8MB SGRAM
---------------------------------------------------------------------
PRODUCT: 3D PRO TURBO PC2TV 8MB ---------------------------------------------------------------------
PROBLEM: System hangs loading OS/2 WARP 4.0 with a 8MB 3D RAGE
PRO TURBO installed. ---------------------------------------------------------------------
SOLUTION: The following procedure will enable you to use the
3D PRO TURBO 8MB card with OS/2 WARP 4.0.
1. Remove the memory module from your 3D PRO TURBO card.
2. Boot to VGA display mode using the following procedure,
During the OS/2 Warp boot process, pressing ALT-F1 when the
block cursor appears in the upper left hand corner will
display a boot menu. Selecting "v" will boot OS/2 WARP in
VGA display mode.
3. Uninstall and re-install the 3.1 OS/2 display drivers.
4. Shutdown OS/2 WARP.
5. Re-install the memory module onto your 3D PRO TURBO card.
6. Restart OS/2 WARP.
! You should be able to access all display modes up to 1280x1024
at 16.7 million colors.
Note: This issue is currently under investigation and will,
hopefully, be resolved with the next release of the
OS/2 display driver.
** For more information contact ATI Customer Support and **
reference ATInfo-BASE file: 2573
=====================================================================
All company and/or product names are trademarks and/or registered
trademarks of their respective manufacturers =====================================================================
=== Конец Ati.Bug ===
--- INN 2.7.2 (20240212 prerelease)
* Origin: This echo is READ-ONLY. Send %HELP to FAQSERVER at (2:5020/181)
Who's Online
Recent Visitors
Guest
Thu May 16 22:07:46 2024
from
Cordoba
via
Telnet
Guest
Thu May 16 11:05:13 2024
from
Shell
via
Raw
Mike Dippel
Fri May 17 05:41:54 2024
from
Sun City Center, Fl
via
Telnet
Guest
Fri May 17 00:12:06 2024
from
Ci, Sta
via
Telnet